PMC-Sierra Introduces Highly Integrated WiMAX MIMO RF IC Solutions
September 17th, 2007 Leave a comment Visited 33 times, 1 so far today
PMC-Sierra Introduces Highly Integrated WiMAX MIMO RF IC Solutions
WiZIRD Family Delivers Full 2Tx/2Rx MIMO with Multi-Band Capability to Extend Wireless Coverage, Increase Data Rate and Enable Global Roaming
PMC-Sierra, Inc. (Nasdaq:PMCS) today introduced its first WiMAX RF IC solutions for Femtocell base stations, Customer Premises Equipment, and Mobile Station designs (see Figure 1). The PM8800 WiZIRD™ 2Tx/2Rx is the industry’s most integrated WiMAX RF IC solution with full 2Tx/2Rx Multiple In/Multiple Out (MIMO) capability to support a maximum downlink data rate of 63 Mbit/s per sector and a peak uplink data rate of 28 Mbit/s per sector in a 10 MHz channel. The PM8800’s Multi-Band capability (2.3-2.7 GHz and 3.3-3.8 GHz) allows a single design to cover all popular licensed radio spectra in the world (see Figure 2). These advanced features enable next generation consumer services such as gaming, video and voice conferencing, streaming media applications, as well as video posting and sharing (e.g.YouTube). The PM8801 WiZIRD 1Tx/2Rx integrates a single transmit and two receive radio paths, as well as Multi-Band support, and is ideal for WiMAX Wave2 subscriber equipment such as CPE and laptop devices. The WiZIRD family is powered by PMC-Sierra’s “Extend Range, Rate and Roaming Architecture” (EXTRRRA), which enables WiMAX service providers to expand coverage areas with minimum capital expenditure, increase the data rate using full 2Tx/2Rx MIMO capability, and support global roaming.
PMC-Sierra also announced a collaboration with Sequans Communications, a leading WiMAX baseband chip supplier, to integrate its WiZIRD RF IC family with Sequans’ advanced SQN1130 and SQN2130 subscriber station and base station chips. The collaboration has yielded best-of-breed Mobile WiMAX product designs, including Multi-Band CPE, Femtocell, and Mobile Station. These complete solutions address OEM/ODM needs to deliver the carrier class end products required for high-performance, cost-effective and quality-driven WiMAX deployments.
PMC-Sierra and Sequans Communications will be showing IEEE 802.16e-2005 Wave2 WiMAX Femtocell and Mobile Station designs at WiMAX World USA, McCormick Place, Chicago, in booths 732 and 814, September 26 – 27, 2007.
“PMC-Sierra’s Multi-Band and 2Tx/2Rx WiZIRD RF IC family meshes perfectly with both our SQN2130 Base Station and SQN1130 Mobile Station baseband chips, delivering the high performance Femtocell, CPE and Mobile Station designs required to drive worldwide WiMAX adoption,” said Bernard Aboussouan, vice president of marketing at Sequans Communications.
Extending WiMAX Range, Rate and Roaming Capabilities
Global WiMAX service providers need to expand their coverage area with minimal capital investment. The versatility of PMC-Sierra’s PM8800 WiZIRD 2Tx/2Rx allows the same RF IC device to be used in both Femtocell base station and subscriber station designs. With the combined volume of CPE and infrastructure markets, cost-effective WiMAX Femtocell base stations can be designed and deployed to extend network coverage. The increase of multimedia content sharing over the Internet requires high downlink and uplink bandwidth. Using PM8800 WiZIRD 2Tx/2Rx’s full MIMO capability, advanced Wave2+ Mobile Stations can offer higher uplink and downlink data rates over existing solutions. With its Multi-Band feature, the WiZIRD product family covers the popular licensed spectra planned for WiMAX deployment around the globe and enables OEMs and ODMs to address multiple geographies with a single design.
“Global WiMAX deployment is at a crossroads today, and many of the challenges to large scale deployment can only be addressed by an innovative RF IC solution,” said Tom Sun, vice president and general manager for PMC-Sierra’s Broadband Wireless Division. “PMC-Sierra’s WiZIRD product family with its EXTRRRA architecture is the only RF IC solution that can extend range coverage, increase data rate and enable global roaming.”
The PM8800 WiZIRD 2Tx/2Rx is the industry’s highest density WiMAX RF IC solution, integrating full 2Tx/2Rx MIMO capability, Multi-Band support, direct-conversion ZIF RF transceiver, analog and digital converters, and an industry-standard JEDEC JESD207 compliant baseband digital interface in a single device (see Figure 3). The dual-radio path PM8800 WiZIRD 2Tx/2Rx eliminates the need for multiple radio devices and provides programmability to support multiple frequency bands for worldwide WiMAX roaming. The device delivers up to 64QAM modulation for both Tx paths at 0dBm output power level with an EVM rating that addresses a complete spectrum of WiMAX solutions from base station applications to mobile subscriber solutions. The PM8800 features:
Low-power dual-receivers and dual-transmitters;
Dual-band transceiver covering the 2.3-2.7 GHz and 3.3-3.8 GHz spectra;
Direct-conversion ZIF design;
Support for 802.16e-2005 and 802.16-2004 IEEE standards;
Configurable channel bandwidths of 3.5 MHz, 5 MHz, 7 MHz, 8.75 MHz, 10 MHz, 14 MHz and 20 MHz;
Integrated DCXO supports AFC with no external components;
Flexible baseband device interface options: digital parallel I/Q interface (JEDEC JESD207) or analog I/Q;
Integrated analog-to-digital and digital-to-analog converters;
Integrated transmitter baluns; and
Integrated hardware support for calibration.
The PM8801 WiZIRD 1Tx/2Rx offers similar functionality to the PM8800 WiZIRD 2Tx/2Rx, but integrates a single transmit and two receive branches, Multi-Band support and analog I/Q interfaces (see Figure 4). The devices are software and hardware compatible.
Availability and Customer Support
The PM8800 WiZIRD 2Tx/2Rx and PM8801 WiZIRD 1Tx/2Rx are sampling now. The devices are implemented in CMOS technology and packaged in a 108-pin MLF/QFN package. The devices are rated for industrial temperature operation (-40 to +85 degrees Celsius). A comprehensive support package including datasheets, application notes and reference design material is available at www.pmc-sierra.com, or contact PMC-Sierra at sales {at} pmc-sierra(.)com.
About PMC-Sierra
PMC-SierraTM is a leading provider of broadband communications and storage semiconductors for metro, access, fiber to the home, wireless infrastructure, storage, laser printers, and fiber access gateway equipment. PMC-Sierra offers worldwide technical and sales support, including a network of offices throughout North America, Europe, Israel and Asia. The company is publicly traded on the NASDAQ Stock Market under the PMCS symbol. For more information, visit www.pmc-sierra.com.
Attachments:
Figure 1: Common Design for Femtocell Base Station and Mobile Station Designs
Figure 2: WiZIRD Supports Popular Global Licensed Radio Spectra
Figure 3/4: PM8800/PM8801 WiZIRD Block Diagrams
Figure 5: EXTRRRA Architecture
Figure 6: Increase Peak Data Rate with MIMO Support
For figures visit: http://www.pmc-sierra.com/news_room/pdf/WiZIRD_figures.pdf
For photos visit: http://www.pmc-sierra.com/news_room/images/WiZiRD_SET_8800_8801_5×7 _72dp.jpg (Due to its length, this URL may need to be copied/pasted into your Internet browser’s address field. Remove the extra space if one exists).
Resources to Extend Your Product Knowledge and Understanding
PMC-Sierra New Products www.pmc-sierra.com/products/newProducts.html
PMC-Sierra White Papers www.pmc-sierra.com/whitepaper
© Copyright PMC-Sierra, Inc. 2007. All rights reserved. PMC is a registered trademark of PMC-Sierra, Inc. in the United States and other countries. PMC-SIERRA, PMCS, WiZIRD and “Enabling connectivity. Empowering people.” are trademarks of PMC-Sierra, Inc. Other product and company names mentioned herein may be trademarks of their respective owners.
Contacts
PMC-Sierra:
Susan Shaw, +1 604-415-6031
susan_shaw {at} pmc-sierra(.)com
or
US Editorial:
Christian Bateman, +1 415-882-9494
batemanc {at} loomisgroup(.)com
or
China Editorial:
Jo Soo, +011 852-2837-4744
jo.soo {at} edelman(.)com
or
Japan Editorial:
Toshiyuki Okazaki, +011 81-3-5351-7614
okazakit {at} loomisgroup(.)com
|
TechWhack on Facebook
|
